Shot Pot鈩� Timer 21
Shot Pot鈩� Timer 22
Shot Pot鈩� Timer 23
Shot Pot鈩� Timer 24
Shot Pot鈩� Timer 25
Shot Pot鈩� Timer 26
Shot Pot鈩� Timer 27
Shot Pot鈩� Timer 28
Shot Pot鈩� Timer 29
Shot Pot鈩� Timer 210
Shot Pot鈩� Timer 211
Shot Pot鈩� Timer 2 Clearance nozzle to benchtop surface 7鈥�12
Shot Pot鈩� Timer 2Clearance nozzle to back of machine 7鈥�13
Shot Pot鈩� Timer 2Free Glue Diligence鈩� Testing Available14
Shot Pot鈩� Timer 2CSP005 Lid seal 15
Shot Pot鈩� Timer 216
Shot Pot鈩� Timer 2Shot Pot Timer Melt Tank17
Shot Pot鈩� Timer 218
Shot Pot鈩� Timer 2filter end cap gluing19

Compatible With:

Most standard hot melt adhesives.

Product Manuals / Related PDFs:

Manual available - Please call

Shot Pot鈩� Timer 2

Foot switch activated benchtop hot melt metering system with PID temperature control to apply precise, repeatable hot melt patterns to components moved under the nozzle. The machine should be pressurized with dry air and purged occasionally. PUR is typically removed from cartridges and placed in machine to melt and be applied.

$

Product Videos (Click to View)

Product Details:

  • Complete "Turn-key" bench top hot melt extrusion system.
  • Foot switch with cable to unit to actuate adhesive flow.
  • 3.5 lb. hot melt tank capacity.聽 Teflon lined.
  • 3 to 5 lb. per hour melt rate depending on adhesive.
  • Removable melt grid in bottom of tank.
  • PID adjustable temperature controller - Readout available in Fahrenheit or Celcius.
  • Pneumatically adjustable adhesive flow control.
  • High Speed valve/module for excellent adhesive shut off.
  • Adjustable timer from .1 to 9 seconds for pre-measured adhesive patterns.
  • Three nozzles and one extra tank seal included with purchase.
  • Typical adhesive viscosities range between 500 and 5000 cps.
  • Typical hot melt used with system are EVA's, APAO's, Polyamides, pressure sensitive and fugitive hot melts.
  • Power requirements are 120VAC or 240VAC, 1200 W
  • Shot Pot/Shot Pot Timer 2 Power Requirements: 120VAC=10 amp/1ph/50-60Hz 240VAC=5 amp/1ph/50-60Hz
  • Dimensions are 18" high x 15" wide x 13.5" deep.
  • Weight is 32.5 lbs.
  • Shot Pot Adapter Threads are 1/4BSPP.
  • Compressed air required: 30-90 psi.
  • Clearance nozzle to benchtop surface 7鈥滳learance nozzle to back of machine 7鈥滲ase can be reversed/ machine will be cantilevered
  • Six month warranty against defective workmanship
  • Method of shipping is UPS.
The Shot Pot Timer鈩� 2 will increase production speeds dramatically over the manual application of hot melt with hot melt handguns. Both hands are free to move the component requiring precise hot melt dots or lines. Product quality will improve with the Shot Pot Timer鈩� 2 as precise patterns of hot melt are applied only where needed with no adhesive stringing from the nozzle. Finally, hot melt consumption will be reduced because this machine applies only the quantity of adhesive set by the operator.

QUOTE THIS MACHINERY

Shot Pot鈩� Timer 2

Call 1-410-761-2727Or Fill Out The Form Below
  • This field is for validation purposes and should be left unchanged.